In order that the telescope may finally perform satisfactorily it
is not sufficient that the lenses should both be of proper figure;
they must also both be properly centred in their cells. If either
lens is tipped aside, or slid out from its proper central line,
the definition will be injured. As this is liable to happen with
almost any telescope, we shall explain how the proper adjustment
is to be made.
The easiest way to test this adjustment is to set the cell with
the two glasses of the objective in it against a wall at night,
and going to a short distance, observe the reflection in the glass
of the flame of a candle held in the hand. Three or four
reflections will be seen from the different surfaces. The
observer, holding the candle before his eye, and having his line
of sight as close as possible to the flame, must then move until
the different images of the flame coincide with each other. If he
cannot bring them into coincidence, owing to different pairs
coinciding on different sides of the flame, the glasses are not
perfectly centred upon each other. When the centring is perfect,
the observer having the light in the line of the axes of the
lenses, and (if it were possible to do so) looking through the
centre of the flame, would see the three or four images all in
coincidence.
Pages:
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130